HMIST6500 Schneider HMI

HMIST6500 Schneider HMI Specification

Processor Speed
ARM Cortex A8, 1 GHz

Display Type
TFT LCD

Resolution
1024 x 600 pixels (WSVGA)

Power Source
External 24V DC supply

Output
Interface outputs to PLC/Controller and other equipment

Components
Display, Processor, Touchscreen, Communication ports

Interface
RS232, RS485, 2x USB 2.0, Ethernet (RJ45), SD slot

Operating Temperature
0C to 50C

Input
Touch input, 2 USB ports, 2 serial ports (RS232/RS485), 1 Ethernet port

Response Time
Less than 30 ms (typical for touchscreen)

Usage
Industrial Automation

Power Supply
External supply, 24V DC 20%

Features
Panel mount, high-resolution display, multi-protocol support, easy configuration, robust design

IP Rating
IP65 (front panel)

Product Type
HMI Touch Panel

Application
Industrial process monitoring, automation control

Rated Voltage
24V DC

Supply Voltage
24V DC

Size
10.2 inches

Dimension (L*W*H)
290 mm x 212 mm x 54 mm

Function
Human Machine Interface (Operator Panel)

Color
Black, Grey

Weight
1.8 kg (approx)

Capacity
Dependent on application, high memory management

Thickness
54 mm (panel depth)

Current Rating
0.5A max at 24V DC

Frequency
50/60 Hz (where applicable)

Memory
128MB Flash, 64MB RAM

Mounting
Panel Mount

Relative Humidity
10% - 90% (non-condensing)

Language Support
Multilingual (as per software capability)

Front Panel Material
Polycarbonate with anti-glare coating

Storage Temperature
-20°C to 60°C

Touch Technology
Analog Resistive Touchscreen

Backlight Life
50000 hours (minimum at 25°C)

Software
Compatible with Vijeo Designer

Cooling Method
Natural air convection

About HMIST6500 Schneider HMI

Description

This Basic HMI panel belongs to the Schneider Electric Harmony ST6 range. This single touch resistive HMI is made of alluminium front panel with a multi-color status indicator showing the various operating modes. This HMI interface is 10.1 inch wide with 16 million colors and 1024 x 600 pixel resolution (SVGA). It is powered by EcoStruxure Operator Terminal Expert software for intuitive user experience. It has a 800 MHz ARM Cortex-A8 CPU, 1 GB device memory, 128 MB user data memory, and 512 KB backup memory. This HMI ST6 supports 2x Ethernet port, COM1 (RS-232C), COM2 (RS-485), 1x USB 2.0 Type A, and 1x USB 2.0 Micro-B port. Its dimensions are 273mm (width) x 203mm (height) x 47mm (depth) and weighs 1.30Kg. This is intended for indsutries like packaging, food & beverage, textile, HVAC equipment, and compressors, and also for end users looking for maintenance of their Web devices. It conforms to standards like EN (61000-6-4, 61000-6-2, 61131-2), UL 61010-2-201, CSA C22.2 No 61010-2-201 and certifications like CSA, CE, China RoHS, KC, REACH. This range is designed to meet the needs of simple machine operators for good visualization, connectivity, cybersecurity with EcoStruxure Secure Connect Advisor, and cost effective equipment. The various degree of protection are IP65F, Type 1, Type 4X (indoor use only), Type 13 (on the front panel when properly installed in an enclosure).

Specifications

Main
Range of product	Harmony ST6
Product or component type	Touch panel screen
Processor name	ARM Cortex-A8

Complementary
Display size	10 inch
Display type	Colour TFT LCD
Display colour	16 million colours
Display resolution	1024 x 600 pixels WSVGA
Touch panel	Single touch analogue resistive
Backlight lifespan	50000 hours with white
Brightness	16 levels
Character font	ASCII ASCII (European characters) Chinese (simplified Chinese) Japanese (ANK, Kanji) Katakana Korean Taiwanese (traditional Chinese)
[Us] rated supply voltage	24 V DC (+/- 20 %)
Inrush current	30 A
Local signalling	Status LED green, steady for offline Status LED green, steady for operating Status LED green, flashing for operating Status LED green, faded for stand-by Status LED orange, flashing for software starting up Status LED red, steady for power supply (ON) Status LED red, flashing for operating Status LED red, off for power supply (OFF)
Power consumption in W	12.6 W
number of pages	200 application pages
Software package	EcoStruxure Operator Terminal Expert
Processor frequency	800 MHz
Port Ethernet	10/100BASE
Memory description	1 GB device memory 512 KB backup memory 128 MB user data memory
Integrated connection type	1 COM1 serial link - 1 SUB-D 9-pin female - RS232C (rate: 2400...115200 bps)bottom 1 COM2 serial link - female RJ45 - RS485 (rate: 2400...115200 bps)back COM2 serial link (rate: 2400...187500 bps)back 1 USB 2.0 type Abottom 1 USB 2.0 type micro B 2 Ethernet
Supply	External supply
Realtime clock	Built-in 0...50 C Built-in 10...90 % RH
downloadable protocols	Modbus Uni-TE Third party protocols
Product brand	Schneider Electric Modicon Mitsubishi Melsec Omron Sysmac Rockwell Automation Allen-Bradley Siemens Simatic
Fixing mode	By 4 screws, mounting on 1.6...5 mm thick panel conforming to UL 61010-2-201 By 4 screws conforming to IEC 61131-2 By 4 screws conforming to IEC 61000-6-2
Enclosure material	PC
Front material	Aluminium
marking	CE
Cut-out dimensions	255 x 185 mm panel cut dimension
Height	203 mm
Width	273 mm
Depth	47 mm
Net weight	1.3 kg

Environment
Immunity to microbreaks	10 ms
Standards	IEC 61000-6-4 IEC 61000-6-2 IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201
product certifications	CSA CE UKCA
Directives	2014/35/EU - low voltage directive 2014/30/EU - electromagnetic compatibility
Ambient air temperature for operation	050 C
Ambient air temperature for storage	-2060 C
Relative humidity	1090 % non-condensing
Operating altitude	2000 m
IP degree of protection	IP20 (rear panel) conforming to IEC 61131-2 IP65 (front panel) conforming to IEC 61131-2
NEMA degree of protection	NEMA 4 front panel (indoor use) NEMA 13 front panel (in enclosure)
Shock resistance	147 m/s2 for 11 ms (X, Y, Z directions for 3 times) conforming to IEC 61131-2
Vibration resistance	+/- 3.5 mm (f = 59 Hz) X, Y, Z directions for 10 cycles (approx. 100 min) conforming to IEC 61131-2 9.8 m/s2 (f = 9150 Hz)
Electromagnetic compatibility	Electrical fast transient/burst immunity test - test level: 2 kV (power ports) conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV (signal ports) Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2 level 3 Electrostatic discharge immunity test - test level: 8 kV (air discharge)

Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	12.500 cm
Package 1 Width	28.000 cm
Package 1 Length	34.500 cm
Package 1 Weight	1.825 kg
Unit Type of Package 2	S04
Number of Units in Package 2	4
Package 2 Height	30.000 cm
Package 2 Width	40.000 cm
Package 2 Length	60.000 cm
Package 2 Weight	8.300 kg

Robust Industrial Design

Engineered for durability, the HMIST6500 features an IP65-rated front panel made from polycarbonate with an anti-glare coating, allowing it to withstand demanding industrial conditions. Its sturdy panel mount installation ensures secure placement and long-lasting performance, making it ideal for automation control and process monitoring where reliability is paramount.

Advanced Connectivity and User Interface

Designed with a high-resolution TFT LCD touchscreen and multiple communication ports (USB, RS232/RS485, Ethernet, SD slot), the HMIST6500 offers flexible integration with controllers, PLCs, and other equipment. The multilingual interface and compatibility with Vijeo Designer software simplify programming and operation for diverse industrial applications.

FAQ's of HMIST6500 Schneider HMI:

Q: How is the HMIST6500 Schneider HMI installed in an industrial setting?

A: The HMIST6500 is designed for panel mount installation, enabling secure and flush placement on machinery or control cabinets. The IP65-rated front panel withstands dust and moisture, ensuring reliable use in harsh environments.

Q: What touch technology does the HMIST6500 use, and what is its response time?

A: This HMI features analog resistive touchscreen technology, providing accurate touch response with a typical response time of less than 30 ms. It supports precise input, even while wearing industrial gloves.

Q: When should I use the HMIST6500 in my automation process?

A: The HMIST6500 is suitable when monitoring, controlling, or interfacing with PLCs or controllers in industrial automation applications. Its robust design and comprehensive communication options make it ideal for continuous, high-memory operations.

Q: Where can the HMIST6500 be used, considering its operating conditions?

A: It is suitable for indoor industrial environments with operating temperatures from 0C to 50C, storage temperatures from -20C to 60C, and relative humidity between 10% and 90% (non-condensing). Its front panel meets IP65 specifications for dust and water resistance.

Q: What process is involved in configuring the HMIST6500 for specific machine control tasks?

A: Configuration is performed through Vijeo Designer software, which allows users to program the HMI's functions, set up multilingual interfaces, and manage communication protocols for seamless integration with various controllers and equipment.

Q: How does the HMIST6500 benefit industrial automation operations?

A: It enhances operations by offering reliable, high-speed control and monitoring, supporting multiple communication protocols, providing easy system configuration, and accommodating high-memory management for complex processes.

Q: What are the usage advantages of the HMIST6500's display and connectivity?

A: Its 10.2-inch high-resolution display and array of ports (2 USB, RS232/RS485, Ethernet, SD slot) facilitate intuitive user interaction and flexible interfacing with a wide range of industrial devices and networked control systems.

Tell us about your requirement