Replacement code 1

PFXET6400WAD

Replacement code 1 comment

ET6000 Series
DC power supply
TFT color LCD
Panel cut-out size same
Blink function is not supported
For more details, refer to the ""Replacement Guidebook"".

Display type

TFT Color LCD / Resistive Film (analog)

Display size

7" Wide

Resolution

800 x 480 pixels (WVGA)

Effective display area

W154.08 x H85.92 mm [W6.066 x H3.382 in.]

Display colors

65,536 colors

Backlight

LED

Backlight service life

20,000 hrs. or more (each in continuous operation at 25 C [77 F] before backlight brightness decreases to 50%)*1

Brightness control

Resistive Film (analog)

Touch panel lifetime

1,000,000 times or more, Sweeping 100,000 times or more

Language fonts

ASCII: (code page 850) alphanumeric (including European characters)
Chinese (simplified): GB2312-80 codes
Japanese: ANK 158, Kanji: 6,962 (JIS standards 1 & 2) (including 607 nonkanji characters)
Korean: (KSC5601 - 1992 codes) Hangul fonts
Chinese (traditional): BIG 5 codes*2

Character sizes

Width can be expanded 1, 2, 4, and 8 times. Height can be expanded 1/2, 1, 2, 4, and 8 times.

8 x 8 dots

40 char. x 30 rows

8 x 16 dots

40 char. x 15 rows

16 x 16 dots

20 char. x 15 rows

32 x 32 dots

10 char. x 7 rows

Rated input voltage

24 Vdc

Allowable voltage drop

1 ms or less with lowest input voltage, 10 ms or less with rated input voltage

Power consumption

9.2 W or less

In-rush current

50 A or less*1

Voltage endurance

500 Vdc, 10 MÎ or more (between power terminal and FG terminals)

International safety standards

Surrounding air temperature

0 to 50 C [32 to 122 F]

Storage temperature

-20 to +60 C [-4 to 140 F]

Ambient humidity

85 % RH (Wet bulb temperature: 39 C [102.2 F] max. - no condensation)

Storage humidity

10% to 90% RH (Non condensing, wet bulb temperature 39 C [102.2 F] or less)

Dust

0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)

Pollution degree

For use in Pollution Degree 2 environment

Corrosive gases

Free of corrosive gases

Air pressure (altitude range)

800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)

Vibration resistance

IEC/EN60068-2-6, 5 to 150 Hz, 3.5 mm (0.38 in) max., 1gn pm 3 axes

Concussion resistance

IEC 60068-2-27, 1/2 sinusoidal pulse for 11 ms, 15g on 3 axes

Electrostatic discharge immunity

EN/IEC 61131-2, 4 kV direct contact, 8 kV air contact

Electromagnetic compatibility (EMC)

IEC 61000 - 4 - 5, 0.5 kV (Differential Mode on power supply), 1 kV (Common Mode on power supply)

Application memory

FLASH EPROM 32 MB*1

Backup memory

FLASH EPROM 128 KB

Clock accuracy

Variations in operating conditions and battery life can cause a clock inaccuracy from -380 to +90 seconds per month.

Serial (COM1)

Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 (plug)

Serial (COM2)

Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 187,500 bps, Connector: D-Sub 9 pin (plug)

USB (Type A)

Conforms to USB 2.0 (Type A) x 1
Communication distance: 3 m [9.84 ft.] or less

USB (mini-B)

Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 3 m [9.84 ft] or less

Ethernet

IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1

Cooling method

Natural air circulation

Structure

Front Panel: IP65 (IEC60529), Enclosure type 4 indoor use only (UL 50) with screw installation fasteners, Rear Panel: IP20 (IEC 60529)

External dimensions

W207 x H152.4 x D38.2 mm [W8.15 x H6 x D1.5 in.]

External dimensions

Panel cut-out dimensions

External dimensions with cable